Temperature Blanket Update #3: 8 Weeks

I made a little video to show my progress. It’s not washed or blocked so it’s a little bumpy but you can get an idea of the temperature fluctuations.

We were getting into the blues of the 70s but it’s been warm the last few days so the next strip will be back to some purples.

I’m sewing 14 days together and then adding the whole strip at once on top of the previous weeks. You can see the pink square on the bottom left with a safety pin in it—that’s day one. I’ve been sticking a piece of pink yarn through the first day of each new row to keep that straight too. I don’t want any mistakes!

I have a notebook too (of course!) where I track the temps and what block I am on and the over all square number.

So far it’s a manageable project! I’ve found I really prefer it when I can get it done during the day, our house is dark and the bright light makes it so much easier to see. Plus it frees up some time the evenings to do other weaving (I have two projects on the go on my Cricket and Kromski rigid heddles) or something else. When I’m tired I dawdle on the pin loom because it’s a little fiddly once you get towards the end.

Temperature Blanket Update #2: Joining

After the angst of my last post, I decided not to do a decorative crochet join with the squares. I practiced it a lot and got the hang of it but it was so long and tedious. If I was making a small blanket or wall hanging, I’d go for it but it was driving me bananas and that is not the purpose of this project!

I really wanted a project with a small, manageable daily goal. Making a square and then crocheting it perfectly into another square every day did not seem manageable.

I agonized over how else to join the squares and went with something both easy and secure. It does create a ridge on the wrong side but techniques that simply stitched them together so they laid flat did not seem strong enough for what will be a pretty heavy blanket and left gaps.

Wrong side
Right side

I set up my lounge chair on a sunny day and stitched them all together- right sides together, stitched through both loops using the tails I had left on and then pulling the yarn through the seam to secure. It only took me a couple of hours to get caught up from when it started on August 19th.

I’m doing 14 across and if my math is correct, this will leave me with a rectangular blanket and one extra square I could embroider the dates on.

I’m adding the square on to the last day’s square every day and then joining the strips once they reach two weeks. Much more manageable! I’m almost at six weeks now.

Pin Loom Temperature Blanket 1 Month Update

It’s been about a month since I started my temperature blanket. I caught up on the “back” squares and have been able to make a square a day which has been great!

Not so great is that I still haven’t been able to join the squares together. I think I am going to use this technique from this YouTube video. I wish you could see what she was doing a little more clearly but her narration was pretty solid. I made a couple of squares with spare yarn and was able to get a good join.

I had been leaving long tails because I wasn’t sure how I was going to join them but I realized I really preferred to have some sort of border between each one rather than having different day’s colors overlap. I found the above technique and decided to use charcoal colored yarn as my connecting yarn. I’m hoping for sort of a stained glass effect.

My husband was on “vacation” a couple weeks ago when I figured this out. We don’t live near a Micheal’s, maker of the yarn I’m using, and last time I made a order for in-store pick up they gave me the wrong color and made a big deal of how I would have to make another near hour round trip to swap it out. Anyway, I kept thinking we were going to do some day trips and didn’t want to tie up a day with finding a Michael’s with this yarn in stock so I ordered it online for home delivery. It said 3 day delivery and it took two full weeks! This really put me behind.

What’s worse is that we actually didn’t end up doing much of anything over his vacation so I could have taken the time and just picked up the yarn myself. Ugh. I am seriously stressed out about joining a whole month of squares together and keeping up with the daily square. There are only so many hours in the day! Maybe I should have picked something smaller for my first pin loom project? It seemed very manageable at the time and I hope it still is.

Part of what I am learning in my adventures down the pin loom/zoom loom rabbit hole is that there is a lot of talk about making the squares (aka “weavies” a term I’m not sure I like) but very little about actually doing anything with them or how to connect them. That’s why I thought the blanket would be fun. It was a manageable task each day.

I was excited when the Holiday issue of Little Looms magazine arrived and on the cover it said there would be directions on how to knit, crochet and cross stitch pin-loom squares.

I was a little disappointed by the actual article by Gabi van Tassell though, she uses crochet terms like “slip stitch” without giving any idea what that is or how to do it. I’m a recipe developer, I know how important clear directions are. Instead we get “keys” and directions like this:

Why are there no tips on how to keep the yarn underneath the fabric? She also doesn’t mention how or if you have to to line the squares up like the video by the other woman does. The pictures don’t show any squares next to each other so there is no way to know. Zoom loom squares (which are the kind pictured) have bumps and valleys that can “hook” together. Am I supposed to line them up? The video woman says its very important to line them up correctly but van Tassell doesn’t mention it at all.

The bumps have two loops. Which loop do I use? Both? At the same time or separate? Any tips on working in from the front? It’s a very counter intuitive way to join something together. What is a slip stitch? I’ve done some crocheting and never had to do a slip stitch nor it is in any of the “beginning crocheter” videos or articles I’ve read.

I guess I shouldn’t be surprised because I bought a turtle loom from this woman and while she seems very nice, her directions on that were just as horrible. Is there such a dearth of pin loom weavers this is the best we’ve got? Maybe so? Writing directions is an art and I’m surprised these got published in this (very expensive) magazine. I hope it’s not true of all Little Looms patterns! Maybe they don’t have much staff? Or editors? I can see possibly assuming anyone getting the magazine is pretty into weaving but assuming they also know all other yarn crafts seems unreasonable.

Is every weaver a proficient crocheter? I highly doubt it. When I watch crochet videos about weaving together granny squares with a slip stitch, it’s clear it isn’t the most common method and that it is done differently than how you have to for pin loom squares. Further confusing the issue is that the US slip stitch is the same as the UK single crochet.

The magazine looks cute but between this low quality and how they argued with me when I reached out for help accessing the digital copies I paid for, I’m not thinking they are the most critical thinkers there. They kept saying I didn’t know how to log in and was the problem when later it was clear the app was just having technical difficulties that were resolved. Maybe I just need to become very good at weaving and take over the industry.

So one month in I’m stressed and cranky. Hopefully I can zoom through some joining and get back on track. My husband keeps saying it’s all pressure I’m putting on myself but I planned the project so it would be very manageable and leave me plenty of time to do other things. Now I’m way behind and have to hustle to catch up through no fault of my own. If I get too far behind I know I will just not catch up and will have wasted a lot of time, effort and money.

Temperature Blanket

My husband bought me a Zoom Loom (4×4 inch pin loom) for my birthday. I think I got the hang of it on the beach yesterday and of course, ended up at Michael’s on my way home to buy yarn to make a Temperature Blanket with it.

I had seen people crocheting or knitting these blankets—the idea is that you stitch one row every day reflecting the temperature—but not weaving. With good reason—I don’t have a frame loom big enough for 365 rows nor do I want to tie one up for that long. It would work on a rigid heddle but again, it would be tying up the loom for a whole year. But why not a pin loom? I’ve made quilts before so piecing together little 4×4 squares sounds reasonable.

I’m going to have the first block be my birthday (August 19th) because I don’t want to wait until January and it was less than two weeks ago so it will be easy to catch up.

I love color so I decided to have yarn for every five degrees which I think will be more my style than bigger groupings. I saw a woman on Tiktok that did like 30° ranges! Why? Half her blanket was the same. I think having shorter ranges will end up using about the same amount of yarn.

I used the slightly annoying and tedious Temperature Blanket tool (I suggest you add all the extra rows you need before inputting any data) to look up the highs and lows of each day from August 19, 2020 to August 19, 2021 to get an idea of what amount of yarn to get. A 4×4 pin loom uses a little under 8 yards but I rounded it up to 10 to account for mistakes and any variations.

I ended up with 3 skeins of yarn for the most popular temperature ranges, 2 for some ranges that were right on the edge (some ranges had about 25 days in them and that was the upper end of what I could get from one 280 yard skein) and just one for the very highest and some of the lowest temperatures. For some of the ranges I did get a coordinating variegated yarn just for fun. The yardage on those were only 183 so I had to get extra of one just to be safe.

I’m using Impeccable acrylic yarn (I think it’s Michael’s brand) because I wanted something easily washed, easy to find and didn’t have the dye lot issues natural yarns would have. It is advertised as a blanket yarn so it should be fine. With a coupon it ended up being under $3/skein for most of the yarns. The variegated was the same price for about 3/4 as much. I saw some people who used it with pin looms to make baby blankets so hopefully it will be fine.

I don’t have a huge table inside that ready accessible so I took all the yarn outside and figured out the order.

Of course there will be some intermingling but I wanted to make sure the colors that would most likely be together looked okay together. I went with what color felt like the temperature to me without fixating on “blue for cold, red for warm”. I wish I had some green in there but I didn’t end up liking any of them when I was at the store. I wanted to stick to one brand for continuity.

I did get some orange, yellow and a bright variegated I didn’t end up loving with the the other colors so I’ll have to find another use for them.

I used post-it notes and pinned them to each color. I then wound the most commonly used colors for right now into cakes and refastened the post-its to the cakes.

I used the site Time and Date to see what the high (and low) was each day. I’m only using the high. I saw some people using the high and low twisted together or using the average but using the high felt right. That’s the temperature I notice most often since it happens during the day when I’m awake! I am tracking the lows just in case I needed it for some reason.

I have a note book set up to track the temperature and I created a little reference board of all the yarn for a quick reference.

I’m not sure how I am going to stitch them together yet so I’m leaving long tails.